How Much Does Appliance Repair Cost?

Learn the standard cost of hiring professional appliance repair from Excel Oxnard Appliance Repair:

A kitchen is filled with electrical appliances. An electrical stove, dishwasher or refrigerator must have the right wires. In the event an appliance is improperly installed, it will pose a serious possibility of fire. To guarantee your electrical appliances are up to snuff, it is important to call a certified service for appliance repair in Oxnard California.

DIY electrical service for appliances is not a good idea. There are a handful minor repairs where DIY is be possible. In those instances, just be sure to use the right tools and to always turn off the power.

Troubleshooting or installing large household appliances, however, is incredibly more complicated. Do not consider DIY repair. Your stove, for one example, will require either a 250- or 125-volt circuit depending on if it is electrical or gas-powered, plus you will want a minimum of two 20-amp, 125-volt circuits to run smaller electrical appliances. These types of circuits are able to support numerous outlets, but don’t overload them — which often means, a third outlet is required.

The risk of a short (which could cause serious injury or possibly death) during any type of bigger job in most cases isn’t worth it. Instead call for professional appliance repair.

You should search for appliance repair companies in California on the internet. Look for companies with a lot of customer reviews. Or ask for a referral from a friend if you’re having problems with an oven, freezer or refrigerator.

Hiring professional appliance repair technicians begins with contacting a contractor in California that has experience in repair of kitchen appliances. Some companies are appliance-specific, and do not provide repair for all kinds of household appliances.

The main reason a lot of local appliance repair companies are not safe to service a kitchen appliance is because of the amount of electrical appliances that require water to run. Most refrigerators need water to make ice and dishwashers always need water to wash dishes. Water is very dangerous when performing electrical repairs.

If electrical repairs aren’t done properly and waterlines rupture, for example, there’s a very good chance of electrocution. Water and electricity don’t mix.

Which is why you want a California appliance repair company who knows how to deal with both.

Experienced appliance repairmen often charge close to $50 to $75 per hour for their work, and solo contractors may cost somewhere around $70 and $120 an hour. This might sound like a lot, but it’s preferable to pay a higher price for quality work. If a “professional” is lower than $30 per hour, be skeptical.

You should be sure the contractor has a permit from California for any type of electrical repairs. Some unqualified services will say that they won’t require a permit, but never trust it. Always double check with California officials.

Most local repairmen in California will charge a built-in cost for their travel, from $45 to $60. You will pay the total price whether or not the repair is performed, so it’s smart to have a list on-hand of appliances for the repairmen to troubleshoot.

The national average is $150 for refrigerator repairs – local services in California will typically charge $65 to $125 per hour. You should expect a $40 to $75 trip charge too for the repairman to drive and troubleshoot the problem.

The average prices for brand new appliances can range somewhere between $350 and $7,750. The broad range is dependent on the type of kitchen appliance, such as a high-price refrigerator compared to a standard dishwasher.

Troubleshooting or upgrading an electrical appliance is among the most complex repair jobs one can need in a home.

A way to avoid these types of electrical issues is listening attentively to a contractor when he completes an estimate for service. Exact types of wire must be used dependent on the kitchen appliance, and colors of wires (for ground and neutral) sometimes differ when local laws and requirements are altered.

Plus, most jurisdictions now require arc fault protection for all kitchen electrical circuits along with ground fault circuit interruption (GFCI) protection. If the contractor doesn’t mention this, or says you don’t really “need” them, you should call someone else.

Plus, it is important to monitor a technician closely as he or she completes the first review of the range. If it’s a brand new kitchen appliance he or she is installing, ask if it is able to use the exact same circuit or might need an upgrade because there are noticeable size and electrical power use differences in the latest models. The same recommendation applies to dishwashers and stoves.

professionals should be willing to describe what it is they are going to repair, why they must do it and explain each part of the cost, which includes appliance parts, labor and sometimes miscellaneous. There are some appliance repair services that will wave the service fee if repair is completed.


Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts